Archives
ROAD CASE FORKLIFT BASE
BUSHEL TRUCK GALVANIZED STEEL BASE
BULK CART SHELVES / DIVIDERS
Bulk Carts can be equipped with either ¾” painted plywood or 11 gauge plated wire shelves. Shelves are permanently mounted at predetermined locations and are not adjustable. However, custom spacing can be specified. The plywood shelves are supported across the front with a steel angle bracket to prevent bowing under load. Capacity is 325 pounds per shelf. The wire shelves are reinforced with a 6 gauge perimeter wire to prevent sagging. Capacity is 225 pounds per shelf.
4829 – SERIES
The 4829 Series can accommodate up to two shelves.
• One Shelf Spacing: Two 24″ levels or One 32″ level and one 16″ level
• Two Shelf Spacing: Three 16″ levels
5829 – SERIES
The 5829 Series can accommodate up to three shelves.
• One Shelf Spacing: Two 29″ levels or One 14″ level and One 43″ level
• Two Shelf Spacing: Two 14″ levels and One 30″ level
• Three Shelf Spacing: Four 14″ levels
6829 – SERIES
The 6829 Series can accommodate up to three shelves.
• One Shelf Spacing: Two 33″ levels
• Two Shelf Spacing:Two 16: levels and One 33″ level
• Three Shelf Spacing: Four 16: levels
CUSTOM SHELVES AND DIVIDERS
The interiors of all Bulk Carts can be customized to accommodate your unique application. Shelves and dividers are just two of the items we have been asked to customize. Foam Inserts, removable racks and garment hanging bars are just a few of the items that can be added to your carts to optimize the functionality of the cart.
BULK CART DOORS AND LIDS
The Bulk Cart line lends itself to customization. Doors, lids, handles, shelves, bases, casters and locking devices are easily customized for your unique application.
RTC-6829H6
Painted Plywood Door
RTC-5829H6 HD Polyethylene Door
RTC-5829H6
Clear Polycarbonate Door
RTC-4829H6Plywood with ABS Laminate Doors
RTC-4829H6Reinforced Vinyl with Zipper Closure
The VFC style carts with their standard open “V” access and open top can be outfitted with hinged, lockable closures.
VFC-4829H6
Closed Roof and Hinged, Lockable Door
COF-3422H5
Fabricated Plywood / ABS Laminate Hinged Lid and Drop Door
VFC-5829H6Open Roof with Hinged, Lockable Access and Roof
VFC-3429H5Fabricated Plywood / ABS Laminate Hinged Lid and Drop Door
CASTER UPGRADES
The standard casters used on our Bushel Trucks, Bulk Carts and Road Cases were selected for a wide assortment of applications and working environments. However, each application is unique and you should consider all the factors when selecting the right caster and wheel for your application. We offer standard caster upgrades and caster mounting that take into consideration weight capacity, roll ability, rolling surface, overall height, price and extreme environmental considerations. (see Caster Selection Guide)
Material: THERMO-PLASTIC RUBBER
Size: 4” to 8”
Capacity: 450 lbs. to 600 lbs.
• Non-Marking
• Good Floor Protection
• Chemical Resistant
• Quiet Rolling
Material: POLYURETHANE ON POLY
Size: 4” to 8”
Capacity: 700 lbs. to 950 lbs.
• Non-Absorbent
• Chemical Resistant
• Non-Marking
• Good Floor Protection
• Quiet Rolling
Material: PNEUMATIC
Size: 4” to 8”
Capacity: 350 lbs. to 375 lbs.
• Quiet Rolling
• Good Floor Protection
• Shock Absorbing
• Excellent for Rough Terrain
Material: POLYOLEFINSize: 4” to 8”
Capacity: 400 lbs. to 1,000 lbs.
• Light in Weight
• Economical
• High Impact
• Non-Absorbent
• Chemical Resistant
• Good Floor Protection
Material: POLYURETHANE ON STEELSize: 4” to 8”
Capacity: 700 lbs. to 1,250 lbs.
• Heavy-Duty Capacity
• Chemical Resistant
• Water Resistant
• Solvent Resistant
• Non-Marking
• Good Floor Protection
• Quiet Rolling
Material: SEMI-PNEUMATIC
Size: 8” to 10”
Capacity: 500 lbs. to 550 lbs.
• Quiet Rolling
• Good Floor Protection
• Shock Absorbing
• Excellent for Rough Terrain
GARMENT HANGING BARS
FORKLIFT BASE
GALVANIZED STEEL BASE
DECORATING
STENCILING Your company name or other important information can be stenciled on opposite corners of your containers. One inch or two inch all CAPITAL letters are standard. Letter size and number of characters are limited by the size of the container and the available flat surface.
MOLD IN GRAPHICS®
Myton offers multi-color graphic transfers using MOLD IN GRAPHIC SYSTEMS®. These transfers are NOT decals. Company name, logo, consecutive numbering or other important information can be permanently molded into the container surface. Minimum quantities required.
VINYL LETTERING & GRAPHICS
Adhesive-backed Vinyl Graphics provide a high quality solution for an application needing high resolution images and text. Graphics help promote your company and create brand awareness. Vinyl Graphics and text endure tough environmental conditions like sunlight, moisture and abrasion. Graphic size is limited by the size of the container and the available flat surface.
CONSECUTIVE NUMBERING
Keep track of your plastic containers with a sequential numbering system. Two inch numbers are stenciled on opposite corners of your containers.
