BUSHEL TRUCKS are equipped with light/medium duty polyurethane casters as standard equipment. Standard configuration is four (4) swivel, corner-mounted casters. Popular options include brake kits and non-marking grey rubber wheels. These casters feature:
- Double Row Ball Bearing Raceway
- Zinc Plated Finish
- Hardened Raceways
- Axle Roller Bearings
- Thread Guards to protect the axle bearings
BULK CARTS and ROAD CASES are equipped with medium/heavy duty polyurethane casters. Popular options include Top Lock Brakes and Four Position Swivel Locks. These casters include:
- Cold Forged HD (¼”) Top Plate and Fork
- Double Row Ball Bearings
- Hardened Raceways
- Axle Roller Bearings
- Zerk Grease Fittings for Axle and Swivel Bearings
- Zinc Plated Finish
Email This Page
The choice of HANDLES for your carts and containers should be carefully considered. Listed are the standard handles used on plastic SHIPPING CONTAINERS, ROAD CASES, BULK CARTS and BUSHEL TRUCKS. A selection of optional handles is available where special requirements, aesthetics, ergonomics and efficiency are a consideration.
STANDARD HANDLES
NYLON ROPE
The standard handle on most MYTON PLASTIC SHIPPING CONTAINERS is the ¼” nylon rope handle with a rubber grip
SURFACE CHEST
The standard handle on the ROAD CASE and SECURITY SHIPPING CONTAINERS is a spring-loaded surface chest handle with a rubber grip.
HAND HOLES
6” x 2” hand holes are standard on all BULK CARTS.
OPTIONAL HANDLES
13″ GRAB HANDLE
GRAB HANDLES can be used on all Bulk Carts. Handles can be mounted vertically or horizontally.
SURFACE CHEST
SURFACE CHEST handles are an option for all Shipping Containers, Carts and Bushel Trucks.
RECESSED CHEST
RECESS CHEST handles can be used on any Smooth Wall Containers, Carts or Bushel Trucks.
Email This Page
PERMANENT SECURITY STRAPS
The PERMANENT SECURITY STRAP is a convenient way to secure your container and protect it’s contents. The nylon web belt set consists of a “D” ring and metal tip section that is firmly attached to the container sides. The belt is passed through the “D” ring until the grommets on the tip section line up. You can use a seal or small padlock to secure your container.
HASP LOCKS
The HASP LOCK is constructed from heavy gauge, plated steel. The hasp is firmly fastened to the container lid and the staple is attached to the container wall. The hasp assembly can be secured with a padlock or seal.
Depending on the level of security desired and the container being used, up to eight (8) hasps may be needed to secure the container. A cable assembly can be used to connect the hasp locks and the container can then be secured with one padlock or seal.
Email This Page
MATCHING DOLLY
For some applications, casters attached to the plastic containers or the use of a BUSHEL TRUCK is impractical. You can have the security of a reusable plastic container and the mobility of a Bushel Truck with a MATCHING DOLLY.
Dollies are custom-designed and assembled to meet your budget and application. They can be fabricated in steel, aluminum or plywood. Caster size and style are carefully selected based on the conditions and your application.
ADDING CASTERS
You’ve found the perfect Myton container for your application but you want it mobile. We can mount a base and casters on any style Myton container. Casters and base construction will be selected to give you the best combination of serviceability and economics.
MTD-SERIES with 8″ semi-pneumatic casters
MTO – SERIES with standard 4″ swivel casters
Email This Page
BULKHEAD FITTINGS can be installed on your container and will accept spigots, valves or hose connections (not included). The three (3) piece PVC fitting comes with two (2) neoprene gaskets that are sandwiched between the container’s wall and the fitting to prevent leakage. Threaded drain plug (not shown) is included. ¾” inside diameter is standard. Other sizes are available.
SPIN WELD FITTINGS are permanently fused to the container wall. They can be installed on your plastic container and will accept spigots, valves or hose connections (not included). The spin weld fittings are molded of a compatible material to the container. A high-speed router is used to spin the desired diameter fitting at a high RPM, fusing the fitting to the container wall. Spin weld fittings are available as both external and internal threads, raised or flush.
Email This Page
CONTINUOUS STEEL HINGES
The CONTINUOUS STEEL HINGE is only available on smooth wall style containers and carts. Lids can be hinged either along one side, both ends or at the midpoint of the lid.
NYLON WEB HINGES
The NYLON WEB HINGE was designed to accommodate our carts and containers where the perimeter is too narrow to mount a continuous piano-type hinge. If all you need is a way to keep the lid attached to the container, this is an inexpensive way to accomplish the task. A variation of this style of hinge is the use of PERMANENT SECURITY STRAPS. By fastening web belts to the lid, not only do you hinge the lid, you also provide a way to secure and lock the container.
TWO POINT HASP HINGES
The TWO POINT HASP HINGE was designed to accommodate our carts and containers where the perimeter is too narrow to mount a continuous piano-type hinge. A multi-jointed heavy gauge hasp is fastened to the container and the lid.
Email This Page
Customization is key to adapting the Myton product line to your particular application. Dividers and foam inserts are popular options. Dividers and foam inserts can be either permanent or removable. Whether you are looking for part protection from shock and vibration, or separation for better load distribution or kitting applications, Myton can provide an economical solution.
Divider materials are carefully selected for durability and comprise a wide variety of materials including plastic, polyurethane foam, wood and die cut corrugated plastic.
DIVIDERS
SHIPPING CONTAINER
Removable ¼” HDPE sheet
ROAD CASE
Removable ¾” painted plywood
BULK TRANSFER CART
Permanent ½” painted plywood
SHIPPING CONTAINER
Removable multi-compartment ⅛” HDPE
CUSTOM DRAWERS
BUSHEL TRUCK
Permanent ½” varnished plywood
STACK ONLY CONTAINER
Removable ¼” HDPE
FOAM INSERTS
BULK TRANSFER CART
Permanent closed cell urethane foam
SHIPPING CONTAINER
Removable multi-compartment closed cell urethane foam