RTC-4829-H6, Security Cart, 28 Bushel, 48" x 29.5" x 56"

Product Details
Features
Customization Options

Dimensions	Length	Width	Height/Depth
Outside Top	48.0″	29.5″	56.0″
Inside Top	45.5″	27.0″	48.0″

Internal Volume	Cubic Feet	Bushels	Gallons
Capacity	34	27	254.3

Model	Weight Capacity	Tare Weight
Medium Duty	947 lbs	125 lbs

3/4″ Plywood Base

Galvanized base also offered on request.

6″ Polyolefin Casters

Light in Weight
Economical
High Impact
Non-Absorbent
Chemical Resistant
Good Floor Protection

Two Rigid, Two Swivel Corner Placement

When your application requires the carts to travel long distances in a straight line, such as down an aisle or corridor, this popular arrangement is ideal. The cart is steered from the swivel end. Wheel brakes on the swivel casters make this a great setup when transporting by truck.

Our dedicated fabrication team has over fifty years of experience tailoring solutions for our customers needs. Our customization options allow you to Whether it’s adjusting colors, fabricating features or adding personalized touches, we ensure that every detail aligns with your vision. Select from common optional equipment below or contact us to help deliver on your specific needs.

Cart & Container Handles

The choice of handles for your carts and containers should be carefully considered. Nylon rope handles with rubber hand holds are the standard handles used on forkliftable containers, bulk containers and bulk trucks. Road cases and security carts come standard with surface chest handles. Bulk carts come standard with 6″ x 2″ hand holes. A selection of optional handles is available where special requirements, aesthetics, ergonomics and efficiency are a consideration.

Nylon Rope

The standard handle on most containers is the ¼” nylon rope handle with a rubber grip

Surface Chest

The standard handle on the road cases and security carts is a spring-loaded surface chest handle with a rubber grip.

Hand Holes

6” x 2” hand holes are standard on all bulk carts.

13″ Grab Handle

Grab handles can be used on all Bulk Carts. Handles can be mounted vertically or horizontally.

Recessed Chest

Recess chest handles can be used on any Smooth Wall Containers, Carts or Bushel Trucks.

Caster Upgrades

The standard casters used on our Bushel Trucks, Bulk Carts and Road Cases were selected for a wide assortment of applications and working environments. However, each application is unique and you should consider all the factors when selecting the right caster and wheel for your application. We offer standard caster upgrades and caster mounting that take into consideration weight capacity, roll ability, rolling surface, overall height, price and extreme environmental considerations.

Thermo-Plastic Rubber

Size: 4” to 8”
Capacity: 450 lbs. to 600 lbs.

Non-Marking
Good Floor Protection
Chemical Resistant
Quiet Rolling

Polyolefin

Size: 4” to 8”
Capacity: 400 lbs. to 1,000 lbs.

Light in Weight
Economical
High Impact
Non-Absorbent
Chemical Resistant
Good Floor Protection

Polyurethane on Poly

Size: 4” to 8”
Capacity: 700 lbs. to 950 lbs.

Non-Absorbent
Chemical Resistant
Non-Marking
Good Floor Protection
Quiet Rolling

Polyurethane on Steel

Size: 4” to 8”
Capacity: 700 lbs. to 1,250 lbs.

Heavy-Duty Capacity
Chemical Resistant
Water Resistant
Solvent Resistant
Non-Marking
Good Floor Protection
Quiet Rolling

Pneumatic

Size: 4” to 8”
Capacity: 350 lbs. to 375 lbs.

Quiet Rolling
Good Floor Protection
Shock Absorbing
Excellent for Rough Terrain

Semi-Pneumatic

Size: 8” to 10”
Capacity: 500 lbs. to 550 lbs.

Quiet Rolling
Good Floor Protection
Shock Absorbing
Excellent for Rough Terrain

Caster Placement

Four Swivel, Corner Mount

This is our standard caster configuration. Ideal for working in confined, cluttered work areas, where movement in any direction, including sideways is needed. When loading trucks, work vans or staging cart under or around production equipment, this will be the best caster mounting option. Under most applications with lighter loads and on the smaller cart sizes pushing the carts in a straight line can be accomplished safely and with little effort.

Two Swivel, Two Rigid Corner Mount

Diamond Pattern

The Diamond Pattern uses two swivel and two rigid or fixed casters, mounted in a diamond pattern, with the swivel located at the front and rear of the cart. These are your steering casters. The rigid casters are normally mounted slightly higher at the midpoint of the cart, providing a slight tipping action to the cart. This enables the operator to navigate over obstructions on the floor surface such as cables, cracks & thresholds. The diamond pattern is highly maneuverable and tracks well over long distances. This pattern works well with lighter loads and is less stable with heavy loads.

Six Caster Set

There are applications where extreme weight and on some larger carts, where more than four casters are needed to support the carts or to facilitate rollability. Four swivel casters are mounted on the corners, the rigid casters are mounted at the midpoint of the cart and are normally mounted slightly higher, providing a slight tipping action to the cart. This enables the operator to navigate over obstructions on the floor surface such as cables, cracks and thresholds.

Decoration & Pouches

Stenciling

Stenciling your company name or other important information can be stenciled on opposite corners of your containers. One inch or two inch all CAPITAL letters are standard. Letter size and number of characters are limited by the size of the container and the available flat surface.

Mold in Graphics®

Myton offers multi-color graphic transfers using MOLD IN GRAPHIC SYSTEMS®. These transfers are NOT decals. Company name, logo, consecutive numbering or other important information can be permanently molded into the container surface. Minimum quantities required.

Vinyl Lettering & Graphics

Adhesive-backed Vinyl Graphics provide a high quality solution for an application needing high resolution images and text. Graphics help promote your company and create brand awareness. Vinyl Graphics and text endure tough environmental conditions like sunlight, moisture and abrasion. Graphic size is limited by the size of the container and the available flat surface.

Consecutive Numbering

Keep track of your plastic containers with a sequential numbering system. Two inch numbers are stenciled on opposite corners of your containers.

Document Pouches

The vinyl document pouch is constructed with heavy-duty reinforced vinyl and is permanently fastened to the container. The pouches are available in three standard sizes: 18” x 13”, 14″ x 10″ and 8” x 8”. They feature a clear vinyl front panel and hook and loop closure. Custom sizes and design styles are available but may be subject to minimum quantities.

RTC Doors & Closures

Our doors and closures offer durable and secure solutions for any application or industry matching high quality materials with experienced craftsmanship. I you have additional requirements we can work with you to create a custom solution.

Painted Plywood Door

3/4″ painted plywood with reinforced aluminum hinges and aluminum astragal. Vertical bolt closures support pad locks for added security.

Plywood with ABS Laminate Doors

ABS laminate panels affixed to 3/4″ painted plywood with aluminum frame & astragal. Vertical bolt closures support pad locks for added security.

HD Polyethylene Door

1/4″ polyethylene with aluminum frame & astragal. Vertical bolt closures support pad locks for added security.

Reinforced Vinyl with Zipper Closure

Heavy duty vinyl with zipper closure allows for full access to interrior. Zippers support locking mechanism for added security.

Clear Polycarbonate Door

1/4″ clear polycarbonate with aluminum frame & astragal allows for easy view of interrior storage.

Nylon Net

Heavy duty nylon webbing provides visibility of interior with more flexible closure.

Shelves, Dividers and Storage

Painted plywood shelves in various configurations are our most common request but we offer several standard options or can work with you to tailor a solution that meets your exact specifications, requirements or needs.

Painted Plywood Shelves

Fixed 3/4″ painted plywood shelves can be added in one, two or three shelf configurations

Custom Divider With Shelves

We can work with you on custom shelve and divider configurations based on storage requirements.

Steel Reinforced Poly Shelves

Poly shelves offer strength and durability with an easy to clean surface perfect for food service applications

Custom Drawers

A combination of shelves and drawers and be fabricated to support various uses

Collapsable Shelves

Collapsable shelves offer maximum flexibility and can be designed in various configurations

Garment Hanging Bars

Garment bars can be applied across the full width or custom built with divider

RTC-4829-H6, Security Cart, 28 Bushel, 48″ x 29.5″ x 56″